0.08 0.1 0.12 0.127 0.15 0.2 0.3 0.4 0.5

(mm)

If you require a thickness other than those above, please contact us. We manufacture special products which are produced by laminating two or three closely fitted plates to obtain high pressure or high elasticity.

Reference No.	Inside diameter	Outside diameter	Span(S)	Effective area	Type-E fitting
	mm	mm	mm	cm2	d	D	L	t
K 1024	10	24	7	2.65	10	24	2	0.3
K 1226	12	26	7	3.22	12	26	2	0.3
K 1428	14	28	7	3.85	14	28	2	0.3
K 1630	16	30	7	4.54	16	30	2	0.3
K 1734	17	34	8.5	5.67	17	34	2	0.3
K 2040	20	40	10	7.85	20	40	2	0.3
K 2442	24	42	9	9.19	24	42	3	0.3
K 2545	25	45	10	10.41	25	45	3	0.3
K 3050	30	50	10	13.35	30	50	3	0.3
K 3555	35	55	10	16.69	35	55	3	0.3
K 4060	40	60	10	20.42	40	60	3	0.3
K 4565	45	65	10	24.54	45	65	3	0.3
K 5070	50	70	10	29.06	50	70	3	0.3
K 5575	55	75	10	33.97	55	75	3	0.3
K 5580	55	80	12.5	37.01	55	80	3	0.3
K 6080	60	80	10	39.27	60	80	3	0.3
K 6085	60	85	12.5	42.51	60	85	3	0.3
K 6590	65	90	12.5	48.40	65	90	3	0.3
K 7095	70	95	12.5	54.68	70	95	3	0.3
K 7490	74	90	8	53.31	74	90	3	0.3
K 75100	75	100	12.5	61.36	75	100	3.2	0.4
K 80110	80	110	15	72.65	80	110	3.2	0.4
K 84100	84	100	8	66.98	84	100	3.2	0.4
K 85115	85	115	15	80.31	85	115	3.2	0.4
K 90120	90	120	15	88.36	90	120	3.2	0.4
K 95115	95	115	10	87.38	95	115	3.2	0.4
K 95125	95	125	15	96.80	95	125	3.2	0.4
K 100120	100	120	10	95.82	100	120	3.2	0.4
K 100130	100	130	15	105.6	100	130	3.2	0.4
K 110150	110	150	20	135.9	110	150	3.7	0.5
K 135185	135	185	25	206.0	135	185	3.7	0.5
K 160210	160	210	25	273.3	160	210	3.7	0.5

Shapes and sizes other than those in this table are adjusted according to the design specifications. Please contact us. For all types of fittings other than type E, please contact us.

	up